English
Slovenski
Hrvatski
€123.50
€130.00
Rezkalna garnitura stebelnih rezkarjev izdelana iz visokokvalitetnega HWM materiala nudi široko paleto uporabe.
Clamping head CMT 796.
Brand:
The CMT 796 clamping head is intended for the possibility of using router cutters on a table milling machine. Mounting the clamping head is very easy.
ER20 bushes not included!
Limited time offer:
€49.95
€55.50
-10%
Reference:
009370
The CMT 796 clamping head allows us to use router cutters on a table milling machine.
Next to the clamping head we need ER20 bushes, which are not included.
Mounting the clamping head is very simple:
- unscrew the screw on the top of the spindle,
- remove all spacer rings from the spindle,
- screw the clamping head into the borehole where the screw was,
- unscrew the nut on the clamping head and insert the bushing that will fix the router cutters,
- screw the nut on the thread,
- insert the router cutter into the borehole of the bushing,
- use a wrench to tighten the nut to fix the router cutter in the clamping head.
ER20 bushes not included!
Other product combination
| Model | Bore dia. (B/d-mm) | Shank dia. (S-mm) | Adjusting length (LB-mm) | Unit price | Buy | |
|---|---|---|---|---|---|---|
| 796.122.00 | 3 - 12,7 | M12X1,75 | ER20 |
– 10%
€49.95
|
|
|
| 796.142.00 | 3 - 12,7 | M14X2 | ER20 |
– 10%
€49.95
|
|
|
| 796.162.00 | 3 - 12,7 | M16X2 | ER20 |
– 10%
€49.95
|
|
Related products
€8.00
An interchangeable bush for CNC shanks with internal bore diameters ranging from 2 to 12.7 mm.
€175.20
The double-faced cutter straight HW router bit for making rabbets with bearing and guide rings. You can make rabbets with the height of up to 22.2 mm and the depth ranging from 1.6 to 19 mm.
€261.50
The set includes three router bits for making the furniture doors with a 12 mm shank.
€383.00
The set includes 15 router bits for making grooves, rabbets and edge processing with 8 mm shank.
