Spiral bit with insert knives and chipbreaker for locksets CMT 662.160.11

The router bit is suitable for making deep slots, such as grooves for locks, etc.

The main advantage of the router bit is that it always has a blade diameter of 16 mm, compared to classic router bits the diameter of which decreases slightly with each sharpening.

With the router bit, you can make grooves up to a depth of 95 mm.

Changing the blades is very easy with the help of four T8 torx screws.

The maximum depth of the groove is achieved with 4 - 5 passes.

Spare parts:

- carbide knife 23 x 7 x 1.5 mm (790.230.2R / 790.230.3R),

- M3 x 4 x 5.7 mm T8 torx screw (990.082.00).